4.8 mm / 4.81 mm between pixel centres. Initial comparison distance: about 4.8 m; the separate one-arc-minute geometric estimate is about 16.5 m. These are planning guides, not visibility guarantees. 5 HiSeaVis series are listed at this pitch.
P4.8 appears on different screen designs. Compare the exact cabinet, environment, service route and content requirements as well as pitch.
HH4.81 belongs to the common-cathode, energy-saving HH outdoor advertising family. Compare its own cabinet, brightness and power figures. Where HS is listed in the same pitch group, compare the exact HS model and electrical variant as well, using actual specifications and operating conditions for the cost estimate.
The listed rental models in this group are outdoor SEW4.8 and SAW4.8. Compare their agreed cabinet dimensions and protection. Confirm the current SAW4.8 drawing before calculating a layout; its published document is awaiting a dimensional correction. SA / SAW supports hot-swap, offset splicing and energised maintenance under the applicable technical procedure; confirm the permitted components and method for the selected configuration.
TR4 is the indoor transparent option in this pitch group. Compare TR6 separately for the outdoor specification. Keep the published frame-rate field separate from LED refresh rate and confirm the complete processing configuration.
Every figure is from the published datasheet of the model listed; where models differ, each is shown on its own line. A dash means that datasheet does not state the value. Brightness is shown in cd/m² (1 nit = 1 cd/m²).
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Outdoor | 1,000 × 1,000 mm | 208 × 208 | ≥ 6,000 cd/m² | IP66 | ≤186 W/m² | |
| Outdoor | 500 × 1,000 mm | 104 × 208 | ≥ 6,000 cd/m² | IP66 | ≤235 W/m² — HS4.81 (High Power) ≤186 W/m² — HS4.81 (Standard) |
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Outdoor | 500 × 500 mm | 104 × 104 | 4000 cd/m²-7000 cd/m² | IP65 | 200 W/m² typical | |
| Outdoor | 500 × 500 mm | 104 × 104 | 4500 cd/m² | IP65 | 200 W/m² typical |
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Indoor85 – 90 % transparent | 1,000 × 1,000 mm | 208 × 208 | ≥ 2000 cd/m² (White Body) | IP20 | 120 W/m² |
Measure from the nearest viewing position and test the smallest intended content. The 5 m initial rule and 17 m geometric estimate use different assumptions; neither guarantees readability, invisible pixels or the lowest cost for every viewer and installation.
Pixel pitch & viewing distance calculator → Open the full configurator →
Send the screen size, viewing distance and installation environment. You get back a pixel-pitch recommendation, cabinet layout, power estimate and price.