2.604 mm between pixel centres. Initial comparison distance: about 2.6 m; the separate one-arc-minute geometric estimate is about 9.0 m. These are planning guides, not visibility guarantees. 6 HiSeaVis series are listed at this pitch.
P2.6 appears on different screen designs. Compare the exact cabinet, environment, service route and content requirements as well as pitch.
The P2.6 pitch group includes indoor and outdoor rental models across SP / SPW, SV / SVW, SE / SEW and SA / SAW. Compare cabinet size, protection and the stated service route. SE / SEW and SA / SAW include long-cabinet options; confirm accessories, compatibility and maintenance procedures for the chosen configuration. SA / SAW supports hot-swap, offset splicing and energised maintenance under the applicable technical procedure; confirm the permitted components and method for the selected configuration.
VS500-2.604 is the fixed indoor SMD option at P2.6, for walls that are installed once and stay in place.
HS2.604 is the outdoor fine-pitch screen at this pitch, in High Power and Standard versions, for positions where people stand close to the screen.
Every figure is from the published datasheet of the model listed; where models differ, each is shown on its own line. A dash means that datasheet does not state the value. Brightness is shown in cd/m² (1 nit = 1 cd/m²).
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Indoor & outdoor | 500 × 1,000 mm | 192 × 384 | 600 cd/m² — SP2.6 4500 cd/m² — SPW2.6 | IP30 — SP2.6 IP65 front / IP54 rear — SPW2.6 | <200 W/m² — SP2.6 <300 W/m² — SPW2.6 | |
| Indoor & outdoor | 500 × 1,000 mm | 192 × 384 | 600 cd/m² — SV2.6 4500 cd/m² — SVW2.6 | IP30 — SV2.6 IP65 front / IP54 rear — SVW2.6 | <200 W/m² — SV2.6 <300 W/m² — SVW2.6 | |
| Indoor & outdoor | 500 × 500 mm — SE2.6, SEW2.6 500 × 1,000 mm — SE2.6-L, SEW2.6-L | 192 × 192 — SE2.6, SEW2.6 192 × 384 — SE2.6-L, SEW2.6-L | 600 cd/m² — SE2.6, SE2.6-L 4500 cd/m² — SEW2.6, SEW2.6-L | IP31 — SE2.6, SE2.6-L IP65 — SEW2.6, SEW2.6-L | 200 W/m² typical | |
| Indoor & outdoor | 500 × 500 mm — SA2.6, SAW2.6 500 × 1,000 mm — SA2.6-L, SAW2.6-L | 192 × 192 — SA2.6, SAW2.6 192 × 384 — SA2.6-L, SAW2.6-L | 600 cd/m² — SA2.6, SA2.6-L 4000 cd/m² — SAW2.6 4500 cd/m² — SAW2.6-L | IP31 — SA2.6, SA2.6-L IP65 — SAW2.6, SAW2.6-L | 200 W/m² typical |
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Indoor | 500 × 500 mm | 192 × 192 | 700 cd/m² | — | ≤190 W/m² |
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Outdoor | 500 × 1,000 mm | 192 × 384 | ≥ 5,000 cd/m² | IP66 | ≤235 W/m² — HS2.604 (High Power) ≤186 W/m² — HS2.604 (Standard) |
Measure from the nearest viewing position and test the smallest intended content. The 3 m initial rule and 9 m geometric estimate use different assumptions; neither guarantees readability, invisible pixels or the lowest cost for every viewer and installation.
Pixel pitch & viewing distance calculator → Open the full configurator →
Send the screen size, viewing distance and installation environment. You get back a pixel-pitch recommendation, cabinet layout, power estimate and price.