1.5625 mm between pixel centres. Initial comparison distance: about 1.6 m; the separate one-arc-minute geometric estimate is about 5.4 m. These are planning guides, not visibility guarantees. 7 HiSeaVis series are listed at this pitch.
P1.5 appears on different screen designs. Compare the exact cabinet, environment, service route and content requirements as well as pitch.
For a fixed indoor wall at P1.5 the choice is the packaging and the cabinet shape. VS500 uses SMD packaging, V500 uses COB, and VC is a flip-chip COB display on a 16:9 cabinet.
The rental models in this pitch group are indoor examples. Compare SP1.5 and SV1.5 by service access, and SA1.5 with SA1.5-L by cabinet format. Confirm the exact maintenance procedure and required accessories before ordering. SA / SAW supports hot-swap, offset splicing and energised maintenance under the applicable technical procedure; confirm the permitted components and method for the selected configuration.
AT135 is the all-in-one option listed in this pitch group. Compare the complete-screen dimensions, system interfaces and specified functions, and confirm the stand, assembly and commissioning scope for the room.
Every figure is from the published datasheet of the model listed; where models differ, each is shown on its own line. A dash means that datasheet does not state the value. Brightness is shown in cd/m² (1 nit = 1 cd/m²).
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Indoor | 500 × 500 mm | 320 × 320 | 600 cd/m² | — | ≤190 W/m² | |
| Indoor | 500 × 500 mm | 320 × 320 | 600 cd/m² | — | ≤160 W/m² | |
| Indoor | 600 × 337.5 mm | 384 × 216 | 600 cd/m² | — | ≤100 W/m² |
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Indoor | 500 × 500 mm | 320 × 320 | 600 cd/m² | IP30 | <200 W/m² | |
| Indoor | 500 × 500 mm | 320 × 320 | 600 cd/m² | IP30 | <200 W/m² | |
| Indoor | 500 × 500 mm — SA1.5 500 × 1,000 mm — SA1.5-L | 320 × 320 — SA1.5 320 × 640 — SA1.5-L | 600 cd/m² | IP31 | 200 W/m² typical |
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Indoor | 3,025 × 1,825 mm unit | 1920 × 1080 | 600 cd/m² | — | 620 W |
Measure from the nearest viewing position and test the smallest intended content. The 2 m initial rule and 5 m geometric estimate use different assumptions; neither guarantees readability, invisible pixels or the lowest cost for every viewer and installation.
Pixel pitch & viewing distance calculator → Open the full configurator →
Send the screen size, viewing distance and installation environment. You get back a pixel-pitch recommendation, cabinet layout, power estimate and price.