1.95 mm / 1.953 mm between pixel centres. Initial comparison distance: about 1.9 m; the separate one-arc-minute geometric estimate is about 6.7 m. These are planning guides, not visibility guarantees. 7 HiSeaVis series are listed at this pitch.
P1.9 appears on different screen designs. Compare the exact cabinet, environment, service route and content requirements as well as pitch.
Compare the indoor SP1.9, SV1.9, SE1.9 and SA1.9 models by cabinet dimensions, brightness and service access. SA1.9-L is also listed as a long format. Similar pitch or cabinet dimensions do not establish shared spare parts. SA / SAW supports hot-swap, offset splicing and energised maintenance under the applicable technical procedure; confirm the permitted components and method for the selected configuration.
For a fixed indoor wall at P1.9, VS500-1.953 is the SMD option and V500-1.953 is the COB option in its high-brightness version — compare the brightness column below.
HS1.95 is the outdoor screen at this pitch, for positions where people stand close — shopfronts and pedestrian areas. It comes in a High Power and a Standard version; compare them in the table below.
Every figure is from the published datasheet of the model listed; where models differ, each is shown on its own line. A dash means that datasheet does not state the value. Brightness is shown in cd/m² (1 nit = 1 cd/m²).
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Indoor | 500 × 1,000 mm | 256 × 512 | 600 cd/m² | IP30 | <200 W/m² | |
| Indoor | 500 × 1,000 mm | 256 × 512 | 600 cd/m² | IP30 | <200 W/m² | |
| Indoor | 500 × 500 mm | 256 × 256 | 600 cd/m² | IP31 | 200 W/m² typical | |
| Indoor | 500 × 500 mm — SA1.9 500 × 1,000 mm — SA1.9-L | 256 × 256 — SA1.9 256 × 512 — SA1.9-L | 600 cd/m² | IP31 | 200 W/m² typical |
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Indoor | 500 × 500 mm | 256 × 256 | 700 cd/m² | — | ≤190 W/m² | |
| Indoor | 500 × 500 mm | 256 × 256 | 1500 cd/m² | — | ≤165 W/m² |
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Outdoor | 500 × 1,000 mm | 256 × 512 | ≥ 5,000 cd/m² | IP66 | ≤235 W/m² — HS1.95 (High Power) ≤186 W/m² — HS1.95 (Standard) |
Measure from the nearest viewing position and test the smallest intended content. The 2 m initial rule and 7 m geometric estimate use different assumptions; neither guarantees readability, invisible pixels or the lowest cost for every viewer and installation.
Pixel pitch & viewing distance calculator → Open the full configurator →
Send the screen size, viewing distance and installation environment. You get back a pixel-pitch recommendation, cabinet layout, power estimate and price.