2.5 mm between pixel centres. Initial comparison distance: about 2.5 m; the separate one-arc-minute geometric estimate is about 8.6 m. These are planning guides, not visibility guarantees. 8 HiSeaVis series are listed at this pitch.
P2.5 appears on different screen designs. Compare the exact cabinet, environment, service route and content requirements as well as pitch.
Compare the finished poster models by display area, protection and maintenance. PF is the indoor folding family, PFW provides an outdoor specification, and PT offers a wider tri-fold format. Confirm transport and assembly requirements on the selected model.
Compare the listed TM strip formats with the complete-screen formats of TP. Both examples are specified for indoor installation. Confirm the substrate, mounting method, dimensions and delivery scope before choosing for an existing window.
The creative series at P2.5 are finished shapes rather than walls: the CC / CCW cube, with four or five lit faces, and the CL round logo sign for a shopfront. CCW is the outdoor cube; the CL logo sign at this pitch is the indoor model.
SA2.5 is an indoor rental option in this pitch group. Check its cabinet format and published electrical specifications, and confirm the maintenance procedure in the agreed configuration. SA / SAW supports hot-swap, offset splicing and energised maintenance under the applicable technical procedure; confirm the permitted components and method for the selected configuration.
Every figure is from the published datasheet of the model listed; where models differ, each is shown on its own line. A dash means that datasheet does not state the value. Brightness is shown in cd/m² (1 nit = 1 cd/m²).
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Indoor | 650 × 1,930 mm unit | 256 × 768 | 800-1000 cd/m² | IP40 | 135 W/unit | |
| Outdoor | 640 × 1,920 mm display area | — | 5000 cd/m² | IP65 | 120 W/unit | |
| Indoor | 1,280 × 1,930 mm unit | 393,216 dots per unit | 500 cd/m² | — | approx. 150 W/m² |
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Indoor87 – 95 % transparent | 125 × 1,025 mm screen — TM2 · Spec 1 125 × 1,200 mm screen — TM2 · Spec 2 125 × 1,500 mm screen — TM2 · Spec 3 | 50 × 400 — TM2 · Spec 1 50 × 470 — TM2 · Spec 2 50 × 590 — TM2 · Spec 3 | ≥ 1800 cd/m² (Black Light) — TM2 · Spec 1 ≥ 1500 cd/m² (Black Light) — TM2 · Spec 2 ≥ 1000 cd/m² (Black Light) — TM2 · Spec 3 | IP20 | 272 W/m² — TM2 · Spec 1 244 W/m² — TM2 · Spec 2, TM2 · Spec 3 | |
| Indoor85 – 95 % transparent | 2,016 × 1,292 mm screen — TP2 · 90 inch 1,766 × 1,117 mm screen — TP2 · 80 inch 1,016 × 1,592 mm screen — TP2 · 70 inch 766 × 1,294 mm screen — TP2 · 55 inch | 800 × 470 — TP2 · 90 inch 700 × 400 — TP2 · 80 inch 400 × 590 — TP2 · 70 inch 300 × 470 — TP2 · 55 inch | ≥ 1200 cd/m² (Black Light) | IP20 | 350 W/m² |
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Indoor & outdoor | 200×200mm / 400×400mm / 600×600mm (4-sided or 5-sided) | 80 × 80 per module | 800 cd/m² — CC2.5 5000 cd/m² — CCW2.5 | not stated — CC2.5 IP65 — CCW2.5 | approx. 120 W/m² — CC2.5 approx. 250 W/m² — CCW2.5 | |
| Indoor | 250×500mm (Display dia. 500mm, Frame dia. 540mm) | 200 × 200 full screen | ≥ 800 cd/m² | — | approx. 100 W/unit (one figure; max / average not separated) |
| Series · models at this pitch | Use | Cabinet / unit size | Pixels per cabinet / unit | Brightness | IP | Average power |
|---|---|---|---|---|---|---|
| Indoor | 500 × 500 mm | 200 × 200 | 800 cd/m² | IP31 | 200 W/m² typical |
Measure from the nearest viewing position and test the smallest intended content. The 2 m initial rule and 9 m geometric estimate use different assumptions; neither guarantees readability, invisible pixels or the lowest cost for every viewer and installation.
Pixel pitch & viewing distance calculator → Open the full configurator →
Send the screen size, viewing distance and installation environment. You get back a pixel-pitch recommendation, cabinet layout, power estimate and price.