P10 LED Display — Transparent & Outdoor Panels Compared

10 mm between pixel centres. Initial comparison distance: about 10.0 m; the separate one-arc-minute geometric estimate is about 34.4 m. These are planning guides, not visibility guarantees. 4 HiSeaVis series are listed at this pitch.

Pixel pitchP1010 mm

Comfortable viewing from10.0 mpitch in mm ≈ distance in m

Pixels invisible beyond34.4 mpitch × 3,438 (1 arc-minute)

Series at this pitch4Transparent & Outdoor

Same pitch, different screens

How to choose between them

P10 appears on different screen designs. Compare the exact cabinet, environment, service route and content requirements as well as pitch.

Transparent LED Display

Compare TM10 with TS10 by the actual agreed format and mounting drawing. TS10 lists a 960 × 1000 mm panel, rather than a square-metre panel. Confirm the TM10 dimension and resolution pairing before calculating a wall from its published sheet.

Outdoor Advertising LED

Two outdoor lines offer P10. HC10 is the high-brightness advertising line and comes in four versions — Common Anode, Common Cathode, Energy Saving and High Brightness — compared in the table below. HL10 is the fixed-install line on an aluminium-profile cabinet, for roadside, facade and venue-perimeter screens.

Compared

Every HiSeaVis series at P10

Every figure is from the published datasheet of the model listed; where models differ, each is shown on its own line. A dash means that datasheet does not state the value. Brightness is shown in cd/m² (1 nit = 1 cd/m²).

Transparent LED Display · 2 series

Series · models at this pitch	Use	Cabinet / unit size	Pixels per cabinet / unit	Brightness	IP	Average power
TM SeriesTM10	Indoor87 – 95 % transparent	960 × 1,000 mm screen	96 × 100	≥ 7000 cd/m² (White Light)	IP20	300 W/m²
TS SeriesTS10	Indoor92 – 95 % transparent	960 × 1,000 mm screen	96 × 100	≥ 7000 cd/m² (White Body)	IP20	300 W/m²

Outdoor Advertising LED · 2 series

Series · models at this pitch	Use	Cabinet / unit size	Pixels per cabinet / unit	Brightness	IP	Average power
HC SeriesHC10 (Common Anode), HC10 (Common Cathode), HC10 (Energy Saving), HC10 (High Brightness)	Outdoor	960 × 960 mm	96 × 96	≥ 6,500 cd/m² — HC10 (Common Anode), HC10 (Common Cathode) 5,500 cd/m² — HC10 (Energy Saving) 10,000 cd/m² — HC10 (High Brightness)	IP66	268 W/m² — HC10 (Common Anode) 186 W/m² — HC10 (Common Cathode) 92 W/m² — HC10 (Energy Saving) 168 W/m² — HC10 (High Brightness)
HL SeriesHL10	Outdoor	960 × 960 mm	96 × 96	6500-10000 cd/m²	IP66	200 W/m²

Viewing distance

Is P10 right for your room?

Measure from the nearest viewing position and test the smallest intended content. The 10 m initial rule and 34 m geometric estimate use different assumptions; neither guarantees readability, invisible pixels or the lowest cost for every viewer and installation.

Pixel pitch & viewing distance calculator → Open the full configurator →

Other pitches

P1.25 · 4 P1.5 · 7 P1.9 · 7 P2.5 · 8 P2.6 · 6 P2.9 · 7 P3.9 · 16 P4.8 · 5 P6.25 · 10 P10 · 4

Need a quote at this pitch?

Send the screen size, viewing distance and installation environment. You get back a pixel-pitch recommendation, cabinet layout, power estimate and price.

Request a quotation → Email us

Get a quoteReply within 12 hours

Get a Quote